OT2050(OT2000)excavator mounted jackhammer for 70ton excavator rock hammer
What Are the Components of A Hydraulic Breaker?
Your excavator’s hydraulic breaker has several components that work together systematically to deconstruct stone elements. Check them out:
Side Rods,Nitrogen Chamber,Auto-grease System,Piston Mass and Supporting Area,Control Valve,Seal kit,Retainer Pins,Hardened Chisel and Stop Pin
All these are the basic components of any excavator hydraulic breaker. Different brands may have additional components. It is thus advisable to keep your hydraulic breaker’s operations and service manuals close to you.
All hydraulic breakers come with an enclosure that protects all their components from physical damages.
Product model and relevant data
| Ltem |
Units |
0T 2050 |
0T 2000 |
| Job weight |
Side type |
kg |
6420 |
6015 |
| Top type |
kg |
/ |
/ |
| Box type |
kg |
/ |
/ |
| Operating pressure |
bar |
290-3100 |
290-310 |
| Required oil flow |
l/min |
260-300 |
260-310 |
| Impact Rate |
bpm |
100-200 |
100-200 |
| Hoses Diameter |
inch |
1 1/2” |
1 1/2” |
| Back Head Pressure |
kg/cm² |
30-35 |
30-35 |
| Tool Diameter |
mm |
205 |
200 |
| Suitable Excavator |
Ton |
55-70 |
55-70 |
How Should I Grease My Excavator Hydraulic Breaker?
Greasing your excavator hydraulic breaker is an important task as it helps maintain the device as well as ensure that it lasts for long while serving you. These hydraulic breakers are designed to withstand harsh and abusive environmental conditions.
You’ll need to use the correct type and amount of grease to make the greasing process a success. You’ll need to grease your excavator hydraulic breaker’s chisel and bushings. If the excavator hydraulic breaker has insufficient grease, it will overheat.
When the hydraulic breaker heats up too much, it seizes and in most extreme cases, this overheating ends up damaging other components.
You’ll therefore need to contact your local mechanic who’ll recommend the best brand and/or type of grease to use, depending on your environmental condition.
1) Applicable for different brands of excavators, simple& convenient &comfortable operation, easy maintenance
2) High Quality & high precision, high stability &high durability.
3) Low rate of chisel breakage and high working efficiency
4) Wear-resistant and super heat treatment technology
5) Low noise, saving energy and protecting environment
6) Powerful Hydraulic System Increased the Impact of Nitrogen
7) ISO certified by local Authority
Product Tags:
|
|
OT2050 OT2000 Excavator Mounted Jack hammer For 70 Ton Excavator Rock Hammer Images
|
